Setting; About The Setting Mode - Panasonic Aicure ANUP5255V2 Operation Manual

8 Setting

When using the AICURE, set the operating conditions and the method of UV irradiation.

8.1 About the setting mode

Setting should be done in the "Setting Mode". Use the following procedures to establish the "Setting
Mode".
How to enter the setting mode
How to exit from the setting mode
When in the setting mode, re-pressing the "▼" button and the "SET" button at the same time displays
the main screen, regardless of which setting item is on the display.
1
Turn on the power.
UV control
UV intensity
Mnual intensity control
Back Next
The main screen appears.
(For the details, see "7. Power ON/OFF")
2
Press the "▼" button and the "SET" button at the same
time.
Setting
mode
Reference intensity setting
setting
Calibration
Back Next
The setting mode screen appears.
Pressing the "▼" and "▲" buttons switches from a setting item to
another.
Aicure ANUP5255V2
OFF
40%
Go
Go
Setting
17