Displaying Supplementary Status Information - Sony 3-270-589-12 (1) Operating Instructions Manual

Display
Block A Block B
PLAY LOCK
REC
REC LOCK
JOG STILL
JOG FWD
JOG REV
SHUTTLE STILL
SHUTTLE (Speed)
VAR (Speed)
TOP 0001/xxxx
END xxxx/xxxx
PREROLL
C.REC
C.REC LOCK
C.REC-PAUSE
Displaying Supplementary Status
Information
When you set the setup menu item DISPLAY CONTROL
>SUB STATUS to other than "OFF" (see page 96), you
can view supplementary status information on the monitor
screen below the operating mode display area.
T C R 0 0 : 0 4
P L A Y
I N S
Supplementary status information
The following items of supplementary status information
are displayed depending on the setting of the menu item
SUB STATUS.
Setting of menu item
SUB STATUS
TC MODE
REMAIN
42
Superimposed Text Information
Operation mode
Playback mode (servo
locked)
Record mode (servo
unlocked)
Record mode (servo locked)
A still picture in jog mode
Jog mode in forward
direction
Jog mode in reverse
direction
A still picture in shuttle mode
Shuttle mode
Variable speed mode
Cuing up to the first frame of
the first clip.
Cuing up to the last frame of
the last clip.
Cuing up during preroll
Clip Continuous Rec mode
(servo unlocked)
Clip Continuous Rec mode
(servo locked)
Clip Continuous Rec mode
(recording is being stopped)
. .
4 7 0 7
L O C K
2
V A 1 3 4 T C
Items of supplementary
information displayed
Operating mode of the internal
timecode generator
Remaining free capacity of the
disc in minutes, and the number of
new clips that can be recorded on
the disc.
Setting of menu item Items of supplementary
SUB STATUS information displayed
CLIP NO Clip number
PLAYBACK REMAIN Time from the current playback
position to the recording end
position, displayed in time data
format.
The following tables show the on-screen indications of
supplementary information and their meaning.
When the menu item SUB STATUS is set to "TC
MODE":
On-screen Meaning
indication
INT PRST FREE The internal timecode generator is
operating in FREE RUN mode.
INT PRST REC The internal timecode generator is
operating in REC RUN mode.
INT REGEN-T&U The internal timecode generator is in
synchronization with the playback
timecode (LTC) read from disc.
EXT LTC-T&U The internal timecode generator is in
synchronization with the external
timecode (LTC) input to the unit and is
generating the same timecode values
and user bit values as those of the
external timecode (regeneration).
EXT VITC-T&U The internal timecode generator is in
synchronization with VITC present in
the external video signal input to the
unit and is generating the same
timecode values and user bit values as
those of the external timecode
(regeneration).
EXT DVIN-T&U The internal timecode generator is in
synchronization with the external
timecode input to the unit via the
S400 connector and is generating the
same timecode values and user bit
values as those of the external
timecode (regeneration).
EXT DVIN.V-T&U The internal timecode generator is in
synchronization with the external VITC
input to the unit via the
connector interface and is generating
the same timecode values and user bit
values as those of the external
timecode (regeneration).
When the menu item SUB STATUS is set to
"REMAIN":
On-screen Meaning
indication
REMAIN 120m Remaining free capacity of the disc in
298c (these minutes, and the number of new clips
numbers are that can be recorded on the disc.
examples of the When the time and number have not
indication) been detected, "REMAIN ---m ---c"
appears.
S400