Sony 3-270-589-12 (1) Operating Instructions Manual page 94

OPERATIONAL FUNCTION [Operational]: Operation
settings
AUTO EE SELECT [> Auto
EE]: Determine whether
the unit enters E-E mode
or PB mode when audio
and video signals from
other equipment are input.
LOCAL ENABLE [> Local ENA]: Select the buttons that can
be operated on this unit even when the remote control
switch is set to REMOTE.
REC FORMAT [> REC format]: Select the recording format.
DISC END [> Disc End]: Select what the unit should do when
the free disc capacity is exhausted during recording.
CLIP TITLE [> Clip Title]:
Specify how to assign clip
titles.
FILE NAMING [> File Name:
Specify the clip and clip
list name format
SYSTEM SEL [> System
Sel]: Select the system
frequency and area of
use.
Note
After changing any of the sub-
items, press the on/standby
switch to power the unit off
(put it into standby), and then
press it again to power the unit
on. The initial settings of the
setup menu as a whole will
change to reflect the settings
made here.
94
System Menu
DISC OUT [>> DISC OUT]:
When no disc is loaded.
F.FWD/REV [>> F.FWD/
REV]: Operations when
in fast forward or rewind
mode
STOP [>> STOP]: Operations
when in stop mode
STANDBY OFF [>> STBY
OFF]: Operations when
in standby-off mode
AUTO TITLE [>> AT Title]:
Select whether to assign
clip titles automatically.
TITLE [>> Title]: Assign
arbitrary titles.
NAMING FORM [>> Name
Form]: Specify the clip
and clip list name format.
AUTO NAMING [>> AT
Naming]: Specify the
format of the file names
generated when clips are
recorded.
SYSTEM FREQ [>> Sys
Freq]: Select the system
frequency.
UC/J SELECT [>> UC/J sel]:
Select the area of use.
23.9P OUTPUT [>> 23.9P
out]: Select the monitor
output when the
SYSTEM FREQ is
"23.98P".
Description
*EE [>>> EE]: Output video and audio signals received from
other equipment.
PB [>>> PB]: Suppress video and audio signals.
EE [>>> EE]: Output video and audio signals received from
other equipment.
*PB [>>> PB]: Output playback video. Suppress audio signals.
EE [>>> EE]: Output video and audio signals received from
other equipment.
*PB [>>> PB]: Output a still image.
ALL DISABLE [>> All DIS]: The EJECT button and the
buttons in the recording/playback control block cannot be
operated.
*STOP & EJECT [>> STOP&EJ]: Only the STOP button and
EJECT button can be operated.
ALL ENABLE [>> All ENA]: The EJECT button and all of the
buttons in the recording/playback control block can be
operated. The preroll time can be set and time data can be
selected on this unit.
HQ [>> HQ]: 35 Mbps
*SP [>> SP]: 25 Mbps
LP [>> LP]: 18 Mbps
DVCAM [>> DVCAM]: 25 Mbps (only when PDBK-104 option
board is installed)
GOTO TOP [>> GOTO TOP]: Move to the top of the disc.
END STOP [>> END STOP]: Stop at the end of the disc.
*EJECT [>> EJECT]: Eject the disc automatically.
*DISABLE [>>> DISABLE]: Do not assign.
ENABLE [>>> ENABLE]: Assign.
The CLIP AUTO TITLING screen appears.
For details, see "To assign clip titles" (page 65) in Chapter 4.
*C**** [>>> C****]: Standard format
free [>>> free]: Enable free format.
*C**** [>>> C****]: Standard format
title [>>> title]: Assign the same name as clip title.
*60I [>>> 60i]: 59.94i
50I [>>> 50i]: 50i
30P [>>> 30P]: 29.97P
25P [>>> 25P]: 25P
23.98P [>>> 23.98P]: 23.98P
UC [>>> UC]: For areas outside Japan
*J [>>> J]: For Japan
*23.98PsF [>>> 23.9PsF]: Output as 23.98P.
2-3 PULL DOWN [>>> 2-3PD]: Output after pulldown
conversion to 59.94i.