Radiator Sub Fan And Fan Motor - Subaru LEGACY 2003 Service Manual

COOLING
10.Radiator Sub Fan and Fan
Motor
A: REMOVAL
1) Disconnect battery ground cable.
2) Lift-up the vehicle.
3) Remove under cover.
4) Disconnect connector of sub fan motor.
5) Lower the vehicle.
6) Remove air intake duct.

RADIATOR SUB FAN AND FAN MOTOR

FU-00009
LU-00095
CO-00100
IN-00059
CO(H4SO)-30
7) Remove bolts which hold sub fan shroud to radi-
ator.
8) Remove radiator sub fan shroud through the un-
der side of vehicle.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
・Refer to "COMPONENT" for tightening torque.
<Ref. to CO(H4SO)-3, COMPONENT, General De-
scription.>
C: DISASSEMBLY
1) Remove clip which holds motor harness onto
shroud.
2) Remove nut which holds fan itself onto fan motor
and shroud assembly.
CO-00101
CO-00046
CO-00102