Radiator Sub Fan And Fan Motor - Subaru impreza 2001 Service Manual

COOLING
10.Radiator Sub Fan and Fan
Motor
A: REMOVAL
1) Disconnect battery ground cable.
2) Lift-up the vehicle.
3) Remove under cover.
4) Disconnect connector of sub fan motor.
5) Lower the vehicle.
6) Remove air intake duct.
• Non-Turbo model
• Turbo model
7) Remove bolts which hold sub fan shroud to radi-
ator.

RADIATOR SUB FAN AND FAN MOTOR

G6M0095
(B)
EN0078
EN0063
EN0108
8) Remove over flow pipe. (Turbo model)
9) Remove radiator sub fan shroud through the un-
der side of vehicle.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
4.9 N·m (0.50 kgf-m, 3.6 ft-lb)
C: DISASSEMBLY
1) Remove clip which holds motor harness onto
shroud.
2) Remove nut which holds fan itself onto fan motor
and shroud assembly.
CO-48
B2M2937
B2M2937
S2M0937
EN0123