Front Wheel Removal; Wheel Bearing Replacement - Simplicity Coronet Series Service & Repair Manual

6 Wheel Repair
Front Wheel Removal / Bearing Replacement
FRONT WHEELS & TIRES
2
Ref. Qty. Description
1 2 Bearing
2 1 Rim
3 1 Grease Zerk
4 1 Valve
5 1 Tire
6 1 Washer
7 1 E-Ring
Figure 5. Front Wheel Assembly

FRONT WHEEL REMOVAL

Refer to Figure 5.
1. Elevate the front of the rider (see Elevating Front End
for Safe Service)
2. Remove the plastic hub cap (Ref. 8, 9). Remove the
e-ring using a screwdriver (see Figure 4).
3. Remove the washer (Ref. 6).
4. Remove the wheel assembly (Ref. 2 & 5).
5. Install in reverse order of removal.
3
1
1
17 4
5
6
Ref. Qty. Description
8 1 Hub Cap (Simplicity Models)
9 1 Hub Cap
(AGCO-Allis & Massey Ferguson Models)

WHEEL BEARING REPLACEMENT

Refer to Figure 5 for assembly.
1. Elevate the front of the rider (see Elevating Front End
for Safe Service)
2. Remove the front wheel (see Front Wheel Removal).
3. Using a drift and hammer, tap the old bearings
(Ref. 1) out of the rim (Ref. 2).
4. Press the new bearing (Ref. 1) into the rim (Ref. 2)
using an arbor press.
6 - 4
Simplicity Models
7
8
AGCO-Allis &
Massey Ferguson Models
9
7