Wheel Repair; Rear Wheel Removal - Simplicity Coronet Series Service & Repair Manual

REAR WHEELS & TIRES
1
Ref. Qty. Description
1 1 Key
2 1 Tire
3 4 Washer
4 1 Spacer
5 1 Rim
6 1 Valve
7 1 E-Ring
8 1 Hub Cap (Simplicity Models)
Figure 3. Rear Wheel Assembly

REAR WHEEL REMOVAL

NOTE: The assembly shown in Figure 3 may differ
slightly from the assembly on your particular rider–specif-
ically the number of washers used. Each rider is individ-
ually checked and the necessary number of washers is
used. The wheel should be free to slide back and forth
slightly
Refer to Figure 3.
1. Elevate the rear end. (See Elevating Rear End for
Safe Service)
2. Remove the plastic hub cap (Ref. 8, 10). Remove
the e-ring using a screwdriver (see Figure 4).
3. Remove the washers (Ref. 3) and hub cap retainer
(Ref. 9) where applicable.
4. Remove the wheel assembly (Ref. 2 & 5), key
(Ref. 1), spacer (Ref. 4), and washers (Ref. 3).
2
5
3
4
6 3
6 - 3
5 6
Ref. Qty. Description
9 1 Hub Cap Retainer
(AGCO-Allis & Massey Ferguson Models)
10 1 Hub Cap
(AGCO-Allis & Massey Ferguson Models)
Figure 4. Rear Wheel Removal
5. Grease the axle shaft and reinstall in reverse order of
disassembly.

6 Wheel Repair

Rear Wheel Removal
Simplicity Models
7
6 3
AGCO-Allis &
Massey Ferguson Models
7
3
9
3
8
10