Forcing The Integral Solenoid - Saunders CRANE I-VUE Quick Start Manual

Saunders® I-VUE
The integral solenoid can be forced in the following
ways:
1) Pulsed – By depressing and releasing the
manual override button on the solenoid.
2) Locked-Off – By depressing the manual override
button on the solenoid and turning it a quarter
turn (90°) with a screwdriver. To unlock rotate
back by 90°
Care should be taken not to inadvertently depress the manual
override button on the solenoid when working around the I-VUE
4) Via the Network – Change output bit 0 on AS-I and DeviceNet systems.

Forcing the Integral Solenoid

3) I-VUE Software – By holding the black N side
of the magnetic key over N1 until the smart
window reads "FORCED". To un-force the
solenoid hold the black N side of the magnetic
key over N1 until normal operation resumes.
Rev 1.00
www.saundersI-VUE.com
www.cranechempharma.com
15