Switching Outputs Options - Saunders CRANE I-VUE Quick Start Manual

Saunders® I-VUE
1) Enter I-VUE Menu by holding the Green S side of
the key over the S2 target – the screen displays
"Config"
2) Scroll through I-VUE menu by using the Black N side
of the key over the N1 or N3 targets
(Note: the I-VUE menu is on a constant loop, use N1 or
N3 to go forwards or backwards
3) Scroll to the "Output" option
4) Enter this menu by confirming choice with the
Green S side of the key over the S2 target
5) Using the black N side of the magnetic key over N1 or
N3 choose between:
NC (closed) or NO (open)
6) Confirm choice with the Green S side of the key
over the S2 target
7) The I-VUE LED's will flash green to confirm the
change has been made
8) Exit menu by holding the Black N side of the key
over the N1 target until the screen reads "End"
9) Confirm change on the PLC
Switching Output Options
Rev 1.00
www.saundersI-VUE.com
www.cranechempharma.com
11