Saunders CRANE I-VUE Quick Start Manual page 10

Saunders® I-VUE
Safety Lock Features
o Warns the operator to not connect or disconnect Saunders® I-VUE when the
power supply is energized.
o Prevents disconnection - it removes the access to the locknut of the connector.
o A tool is required for removal.
Installing the Safety Lock
1 - Open the safety lock with tool.
2 - Mount the lock on the connector.
3 - Close the lock until the clasp clicks into place.
Removing the Safety Lock
1 - Open the lock with tool.
2 - Remove the lock of the connector.
3 - Disconnect the power supply / command cable of the monitor.
Note: The safety lock must only be removed when the power source is
Hazardous Area Installation
Rev 1.00
off.
www.saundersI-VUE.com
www.cranechempharma.com
10