QTech QSW-4600 Series Hardware Installation And Reference Manual page 57

QSW-4600 Series Switch Hardware Installation and Reference Guide

When using screw threads to fasten cable terminals, the bolt or screw must be tightly fastened, and anti-loosening
measures should be taken, as shown in Figure D-4.
Figure C-4 Cable Fastening

The hard power cable should be fastened by the terminal connection area to prevent stress.

Do not use self-tapping screws to fasten terminals.

Power cables of the same type and in the same cabling direction should be bundled up into cable bunches, with
cables in cable bunches clean and straight.

Binding by using buckles should be performed according to Table C-1.
Cable Bunch Diameter (mm)
10
10-30
30
www.qtech.ru
Binding Space (mm)
80-150
150-200
200-300
57