QTech QSW-4600 Series Hardware Installation And Reference Manual page 40

QSW-4600 Series Switch Hardware Installation and Reference Guide 40
Step 3: If the power sharing combination is composed by two switches, you just need one power sharing cable.
Respectively choose one port on both switches to connect the cable as illustrated in Step 2.
Figure 3-9 Connecting Cables between Two Switches
If the power sharing combination is composed by three switches, you need three power sharing cables. Firstly, insert one
end of the first cable into a port on Switch A and insert the other end of the cable into a port on Switch B. Then, insert one
end of the second cable into the available port on Switch A and the other end into a port on Switch C. Finally, use the third
cable to connect the unoccupied ports on Switch B and Switch C.
Figure 3-10 Connecting Cables among Three Switches 1
www.qtech.ru