Advertisement
Page 4 of 16
5.
Network Settings
Press the SYSTEM SETTINGS to display the LAN Settings. Under I/O
INTERFACES, touch on ETHERNET and then MODE and select
DYNAMIC to "DHCP" for automatic IP address assignment or "Static" for
manual input.
After configuring LAN settings, go to the UTILITY SECTION and touch on
UPGRADE PARAMETERS. Set ADDRESS TYPE to VIAVI SERVER.
Press EXIT button, on the right side of the display to exit back to the
Technical Support
tac@viavisolutions.com
1-844-468-4284 option 3, 1, 1
Advertisement
