Advertisement
3.
StrataSync
Step
Action
1.
Power On
2.
AC Power
3.
LAN Connection
4.
System
5.
Network Settings
Technical Support
Details
Press and hold the ON/OFF button briefly to turn on the T-BERD 6000A V1.
Connect the AC power adapter to the
power connector on the top of the
T-BERD 6000A V1. If you receive a prompt to press the ON key or enter
power standby then press the ON button briefly.
Connect the Ethernet Management
Port on the top of T-BERD 6000A V1
to a network connection with internet
access, using CAT 5E or better cable.
Press the SYSTEM button, to the right of the display, to display the
SYSTEM screen selections.
Press SYSTEM SETTINGS to display the LAN settings. Under I/O
Interfaces, touch on ETHERNET and then MODE and select DYNAMIC to
"DHCP" for automatic IP address assignment or "Static" for manual input.
tac@viavisolutions.com
Page 14 of 16
1-844-468-4284 option 3, 1, 1
Advertisement
