Programming The Mp2+ System - Maxitrol Selectra MP2+ User & Programming Manual

Button 1
Momentary
Switch
Program
Programming Buttons
Screen Indicators
**STORED** will appear on the screen to confirm entry accepted.

T indicates a timed process.

M indicates a manual process.

© 2006 Maxitrol Company, All Rights Reserved
Programming the MP2+
Press once to initially enter programming mode.

Press once during programming to return to the

previous screen.
Press, hold for 5 seconds and release to EXIT

programming mode.
Press either to scroll or advance through menus.

Press either to change current value.

 Press once to enter into the selected menu or
programming mode.
Press once to store programmed setting.

 Press and release once to switch to the next
Process or to move the controller from the
"READY" position to the First Process.
Press twice or hold for 10 seconds to

abort a timed process.
11
Up/Down
Arrows
Enter