Table of Contents
Advertisement
Selecting "READY"
Power up:
"READY" is displayed. Requires a momentary switch closure
to move the controller to the first process.
After last, manual process of a program:
After momentary switch closure to move out of the last process,
controller defaults to the "READY" position.
After last, timed process of a program expires:
Controller defaults to the "READY" position.
Selecting "First Process"
Power up:
Controller begins operating in the First Process of the program.
After last, manual process of a program:
After momentary switch closure to move out of the last process,
controller defaults to the First Process.
After last, timed process of a program expires:
Controller defaults to the First Process.
F/C Mode (Global Setting)
This feature sets the control to operate in either the Fahrenheit (F) or
Celsius (C) mode.
NOTE: Changing between Fahrenheit and Celsius will reset the control to
factory default settings.
Software Version (Global Setting)
Displays the version of software utilized by the controller.
Other Features
Process Indication Output
The TM02 multifunctional timer control features a Process Indication Out-
put. Processes 1 thru 8 have a dedicated pair of terminals, labeled 1 thru 8
on the TM02. An indicator (LED, relay coil, etc...) 24 VDC 2W maximum
can be wired directly to the corresponding terminal block for each Pro-
cess to be indicated. Note Polarity
Program Indication Output
Terminal #9 is used to indicate the controller is operating within a Pro-
gram. The following voltage will be measured across the #9 terminals:
Note Polarity
Controller in the "READY" position
Controller operating in any of the 8 processes making up a Program
© 2006 Maxitrol Company, All Rights Reserved
8
Features
0 VDC
24 VDC 2W max
Advertisement
Table of Contents
