Initial Menu; Process Menu - Maxitrol Selectra MP2+ User & Programming Manual

Initial Menu

1 Press once.
PGM
Programs appears, press
2
Global Settings and press
Programs selected:
3 Scroll
4 After Program loads, scroll
Menu Diagnostic Menu
or
5 Proceed to selected Menu to continue programming.
Global Settings
3 Scroll
and press
ENT
4 Proceed to selected Menu to continue programming.

Process Menu

Process Temperatures
1 Scroll
2 Temp Set Point Process #, scroll
Set Point Temp Process #, XX°F, set
3
value (OFF, 60°F (15°C) to 240°F (115°C)), press
4 **Stored** will flash 4 times to confirm entry.
5 Repeat steps 1 through 4 for Set Points #(2 - 8).
NOTE: Process #1 CAN NOT be OFF. For unused Process Temperature
Set Points, press down arrow until "Off" is displayed. Set Points #(2 - 8)
are factory set to "Off."
© 2006 Maxitrol Company, All Rights Reserved
programming:
ENT
to desired Program # press
and press
selected:
Operational Menu
to
.
programming:
to Temperatures, press
Programming the MP2+
or scroll
.
ENT
.
ENT
Process Menu, Operational
to
.
ENT
Diagnostic Menu
or
.
ENT
to Set Point #, press
12
to
Process Temperature
.
ENT
.
ENT