Controls; Start I/0, Sensitivity - XP Metal Detectors GOLD MAXX Power Instruction Manual

C O N T R O L S
START I/O, SENSITIVITY ___________________________
Turn the machine on with the SENSITIVITY I/O control.
You will hear some quick "beeps" which will tell you
that the detector is correctly operating.
Then you can detect.
Avoid testing your detector inside your house or in shops
electromagnetic pollution (reinforced concrete, metallic girder
The control also enables you to adjust the sensitivity of your detector.
The sensitivity level determines the depth of detection and the stability
of your machine. It can be adjusted to suit the environment so as not
to be plagued with false signals.
Please note that this new detector has a more advanced
SENSITIVITY setting compared to previous GOLD MAXX model,
enabling you to make gradual adjustments to help alleviate false
signals.
The range of adjustments has been widened to offer more
sensitive adjustments at the top end of the range.
You should therefore not be surprised if you have to lower the
potentiometer settings on bad ground. The performance of the
machine will not diminish.
because you can encounter a lot of metallic and
10
and fluorescent lights).
5