System Backup; Web; Resetting To Factory Defaults - Emerson 1410H Reference Manual

Reference Manual
00809-0500-4410
2.13

System backup

The Gateway has a System Backup and Restore feature that saves all user-configured data.
It is best practice that a System Backup be performed periodically throughout the
installation and configuration process. Starting with firmware version 4.7.53, a passphrase
is required when taking a backup. The passphrase is used to encrypt and decrypt the
backup.This will need to be done two times, for both WirelessHART networks.
Procedure
1. Navigate to System Settings > Gateway > Backup and Restore.
2. Enter in a passphrase, confirm, and select Save Backup.
3. The Gateway collects the configuration date; when the file download pop up
4. Enter a save location and file name.
5. Select Save.
6. Select Return to form.
2.14 Web page usage
It is not recommended that users stay logged on to a single page or a large number of
users on multiple pages for long periods of time. This additional loading can slow the flow
of data. The Gateway by default logs users out who are logged on for long periods of time
with no activity.
2.15

Resetting to factory defaults

In the event that the user name, password, or IP address of the Gateway is lost, the
Gateway can be restored to factory defaults by the procedure below.
Note
Following this procedure will cause the network to reform and all configuration
parameters will be reset to factory defaults. Once the Gateway is reset, the user is strongly
recommended to change the default password to maintain system security.
Emerson.com/Rosemount
Note
Once the IP Address of the Gateway has been changed, communications to the web
interface will be lost. Restart the web browser, then log back into the Gateway using
the new IP address and other TCP/IP network settings. The PC/Laptop TCP/IP
network settings may need to be changed. During a Restart Apps the wireless
network will be temporarily lost.
appears, select Save.
Note
System backup contains user passwords and keys used for encrypting
communication. Store downloaded system backups in a secure location. The actual
files are also encrypted.
Configuration
February 2019
17