Loosen The Fender Splash Shield And Place It Aside - Ford Taurus Manual

Remove the retaining bolt from the belt tensioner, then remove the tensioner
10. Remove the upper and center timing belt covers.
11. Disengage the crankshaft position (CKP) sensor electrical connectors.
12. Place the transaxle selector in N (neutral).
13. Rotate the crankshaft until the No. 1 cylinder piston is at TDC of the compression
stroke. Make sure the white mark on the crankshaft damper aligns with the 0°
index mark on the lower timing belt cover and the marks on the intake camshaft
sprockets align with the index marks on the metal timing belt cover.
14. Raise and safely support the vehicle, then remove the right front wheel and tire
assembly.
15.

Loosen the fender splash shield and place it aside.

file://C:\DOCUME~1\SILENT~1\LOCALS~1\Temp\trsHIPBC.htm
Click to enlarge
Location of alignment marks on the camshaft sprockets
Click to enlarge
Стр. 159 из 211
18.11.2005