Ford Taurus Manual page 409

9. Connect the negative battery cable, then start the engine and check for leaks.
Engine Fan
REMOVAL & INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the radiator upper sight shield.
3. Disengage the electrical connector, then remove the integrated relay
control/constant control relay module assembly located on the radiator support.
file://C:\DOCUME~1\SILENT~1\LOCALS~1\Temp\trsHIPBC.htm
Crimping the tabs using a special crimping tool
Disconnect the radiator upper sight shield retaining bolts
Remove the radiator upper sight shield
Стр. 79 из 211
18.11.2005