Advantech MIC-770 User Manual page 32

B: Bracket for expansion module
1. Undo the 4 screws and remove the bottom cover.
2. Undo HDD tray & expansion module baffle.
B
3. Remove COM cable and undo baffle cover.
4. Assemble module on M/B (Note: Optional expansion modules need to connect
with a cable. (Please refer to MB internal I/O connector specification at IO con-
nector page for GPIO connector.)
5. Assemble module baffle with screws.
6. Replace bottom cover and secure with screws.
MIC-770 User Manual
A
20