Table 2–1 lists the minimum requirements and maximum restrictions for three
logical partitions; Table 2–2, for two partitions.
Table 2–2 Requirements for a Two-Partition System
Min
1
CPU modules
1
Memory module
512 Mbyte
size
Memory
1
2
modules
I/O modules²
1
3
DWLPB
1
KFE72-EA
0
KFE72-DA
N/A
4
BA35x
1
5
Disk Drives
2
RRD4x CD-
1
ROMs
6
Floppy
1
Logical partitions support KN7CG (GS140) processors only.
2
The total number of modules connected to the TLSB must not exceed 9 (CPU, I/O, and
memory).
3
Configuration depends on number of I/O hoses available
4
The maximum is
as many as you need, based on the number of SCSI controllers.
5
The maximum depends on the number of StorageWorks shelves in your configuration.
6
Only required to run utilities such as the RAID Configuration Utility (RCU). (You can
move one floppy between partitions, if necessary, as described in Section 2.9.)
Partition 0
Max
5²
4 Gbyte
5
2
8
1
N/A
See footnote 4
See footnote 5
N/A
Partition 1
Min
Max
1
5²
512 Mbyte
4 Gbyte
1
5
1
2
1
8
N/A
N/A
1
1
1
See footnote 4
See footnote 5
1
N/A
.
Configuration Rules 2-3
Need help?
Do you have a question about the AlphaServer GS140 and is the answer not in the manual?