Table of Contents
Advertisement
CS
SHIFTER BEZEL (Continued)
1 - INSTRUMENT PANEL
2 - AUTOSTICK SHIFTER ASSEMBLY
3 - TRACTION CONTROL SWITCH
4 - TRANSMISSION RANGE INDICTOR SURROUND BEZEL
5 - KNOB SET SCREW
SUN VISOR
REMOVAL
All vehicles with driver and passenger side air
bags must have a colored coded five Bullet point air
bag warning label applied to the sun visor, verify
label availability and ensure the label is installed.
(1) Disengage sun visor from center support.
(2) Remove screws attaching sun visor to roof
header (Fig. 30).
(3) Remove sun visor from roof.
(4) If equipped, disconnect illuminated vanity mir-
ror wire connector from body harness.
(5) Remove sun visor from vehicle.
INSTALLATION
All vehicles with driver and passenger side air
bags must have a colored coded five Bullet point air
bag warning label applied to the sun visor, verify
label availability and ensure the label is installed.
(1) Place sun visor in position on vehicle.
(2) Connect illuminated vanity mirror wire connec-
tor into body harness, if equipped.
(3) Place sun visor in position on roof.
(4) Install attaching screws sun visor to roof
header (Fig. 30).
(5) Engage sun visor into center support.
Fig. 29 TRANSMISSION RANGE INDICATOR SURROUND BEZEL
6 - SHIFTER KNOB
7 - FLOOR SHIFT BEZEL
8 - WIRE CONNECTOR
9 - INSTRUMENT PANEL WIRING HARNESS
10 - INSTRUMENT PANEL WIRING CLIP
Fig. 30 SUN VISOR AND HEADLINER ATTACHING
SCREWS
1 - SPRING NUTS
2 - ROOF PANEL
3 - HEADLINER ASSEMBLY
4 - VISOR AND HEADLINER ATTACHING SCREWS
5 - SUN VISOR AND SUN VISOR CENTER SUPPORT
INTERIOR 23 - 101
Advertisement
Table of Contents
