Table of Contents
Advertisement
23 - 82
INSTRUMENT PANEL
STEERING COLUMN OPENING
COVER
REMOVAL
(1) Remove the two screws attaching the steering
column opening cover to instrument panel (Fig. 15).
(2) Pull from bottom rearward to disengage clips
and remove steering column opening cover
(3) Remove the steering opening column cover
from the vehicle.
Fig. 15 PARK BRAKE RELEASE HANDLE & STEERING COLUMN OUTER COVER
1 - INSTRUMENT PANEL TRIM OUTLET PLATE
2 - ATTACHING SCREWS
3 - INSTRUMENT PANEL PARKING BRAKE RELEASE HANDLE
BRACKET
4 - INSTRUMENT PANEL
INSTALLATION
(1) Place the steering opening column cover into
position (Fig. 15).
(2) Install snap tab just left of steering column.
Engage locator tab on right. Starting from upper
right corner engage clip, at lower right squeeze clip
to lower right panel. Engage left clip.
(3) Install two screws attaching the steering col-
umn opening cover to instrument panel.
5 - INFLATABLE KNEE BLOCKER AIRBAG
6 - INSTRUMENT PANEL STEERING COLUMN OPENING COVER
7 - INSTRUMENT PANEL CLUSTER POCKET
8 - BRAKE RELEASE HANDLE
9 - BRAKE HANDLE BRACKET ASSEMBLY
CS
Advertisement
Table of Contents
