Slide-On-Rod" And Extender Features Of Sun Visor; Blind Spot Monitoring (Bsm) - If Equipped - Chrysler 300 2017 Owner's Manual

96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
"Slide-On-Rod" And Extender Features Of Sun
Visor
To use the "Slide-On-Rod" feature of the sun visor, rotate
the sun visor downward and swing the sun visor so it is
parallel to the side window, grab the sun visor and pull
rearwards until the sun visor is in the desired position. To
use the extender feature of the sun visor, grab the extender
which is located at the rear of the visor and pull rearward.
Slide-On-Rod Feature
BLIND SPOT MONITORING (BSM) — IF EQUIPPED
The Blind Spot Monitoring (BSM) system uses two radar
sensors, located inside the rear bumper fascia, to detect
highway licensable vehicles (automobiles, trucks, motor-
cycles, etc.) that enter the blind spot zones from the
rear/front/side of the vehicle.
Rear Detection Zones
When the vehicle is started, the BSM warning light will
momentarily illuminate in both outside rear view mirrors
to let the driver know that the system is operational. The
BSM system sensors operate when the vehicle is in any
forward gear or REVERSE.