Table of Contents
Advertisement
23 - 138
SEATS
THIRD ROW FOLD FLAT HANDLE AND CABLE (Continued)
Fig. 72 INSTALL FOLD FLAT HANDLE
1 - DEPRESS TAB
THIRD ROW LOAD FLOOR
PANEL
REMOVAL
(1) Open liftgate.
(2) Using finger, disengage fold flat cable from
handle (Fig. 73).
Fig. 73 FOLD FLAT CABLE
1 - RELEASE CABLE
(3) Release tab attaching fold flat handle to load
floor panel (Fig. 74).
(4) Disconnect fold flat cable from handle and
remove handle from load floor panel.
(5) Remove load floor panel by using a trim tool
and lifting up the edges to disengage the push pins
(Fig. 75).
(6) Remove load floor panel from seat back frame.
(7) Remove child seat tether bezel, if equipped
(Fig. 76).
Fig. 74 REMOVE FOLD FLAT HANDLE
1 - PRY TAB INWARD
2 - TRIM TOOL
Fig. 75 REMOVE LOAD FLOOR PANEL
1 - TRIM TOOL
2 - LOAD FLOOR PANEL
INSTALLATION
(1) Align load floor panel and push pins fasteners
with holes in seat frame and press into position.
(2) Connect fold flat cable to handle.
(3) Place handle into position on load floor panel.
(4) Press handle into full seated position.
(5) Place third row child seat tether bezel into
position.
(6) Press bezel into the full seated position.
CS
Advertisement
Table of Contents
