Front Panel - Inter-m DSA-500Q Operation Manual

ProfessIonAl PoWer AMPlIfIer

Front Panel

Front Panel
1. POWER SWITCH, POWER LED
switch that supplies power to the system. If you connect the power cable to the AC Input at the back, then
press the switch, power will be supplied to the device and the power leD (blue) will come on.
2. SELECT/ENTER(ENCODER), MENU, ESC
You can turn the seleCT/enTer (enCoDer) left/right to control the volume and navigate the menu. You
can use the MenU and eCs to configure all settings without connecting to a PC.
3. OLED
※ Please be aware that the device may malfunction and the oleD screen may suffer from low resolutions if
oleD that displays the status and MoDe settings of the device.
used in a humid location.
4. AIR VENTS
Air circulation vents to prevent the device from overheating. Please be careful not to block the front/back of
the vents.
5. PRT (PROTECT)/MUTE INDICATOR AND LEVEL INDICATOR (CH1, CH2, CH3, CH4)
1) The PrT/MUTe indicator indicates that the device is currently not producing sound. It comes on/off
regardless of the device's connection status. If the indicator comes on, you can check if the device's status
is at PrT or MUTe from the oleD panel at the front of the PC program.
● If the PrT indicator is on:
The PrT indicator comes on if power is not being supplied to the device correctly, or a problem has
occurred with the wire connections/speaker connections, or each channel of the equipment has been
overloaded. When the indicator comes on, remove all cables connected to the device, wait until the
fAn stops moving (approximately 15 seconds), then restart the device in accordance with standard
booting protocols.
If the device operates normally when power is connected, it is highly likely that an issue has occurred
4 DsA-500Q/2000Q
4 3
0dB 0dB
0dB 0dB
0dB 0dB
0dB 0dB
5 6
2 1
7