8. System adjustments in detail
17
1.1
Measurement range
1.1.1 Product name
Select the name of medium and location (max.
8 char).
Choose the characters with and and the
each corresponding position (1...8) with and
With C you clear the character and with the input is accepted and you quit
the menu level.
1.1.2 Unity
Choice of the measurement value as
% H
O or % TS.
2
Choose the characters with and and the
each corresponding position (1...6) with and
With C you clear the character and with the input is accepted and you quit
the menu level.
1.1.3 Decimal position
Fixation of the decimal position in the display.
With and you make a choice according to
the display. With C you quit the menu point
without any change and with the input is ac-
cepted and you quit the menu level.
1.1.4 Measurement range init
Input of beginning value of the measurement range
between 0...100 %. Standard: 0.0
With C you set the value to 0.0. With the num-
bers you input the beginning value and with
the input is accepted and you quit the menu level.
1.1.5 Measurement range end
Input of end value of the measurement range be-
tween 0...100 %. Standard: 0.0
With C you set the value to 1.0. With the num-
bers you input the beginning value and with
the input is accepted and you quit the menu level.
Measurement range
Product name
Material
Measurement range
Unity
% H
O
2
Measurement range
Decimal position
000.0
Meas. range
7 8
Init
4 5
0.0
% H
O
2
1 2
C 0
Meas. range
7
8
End
4
5
%
80.0
H
O
1
2
2
C
0
C
C
C
9
6
3
9
6
3