Table of Contents
Advertisement
7 Menu Parameters of the System in Detail
1. Display of the Measured
Values
1.1 - Density
1.2 - Throughput
1.3 - Velocity
1.4 - Totalisator
Use of the Evaluation Unit by:
1.0 Display:
1.1 Display of the measured density in kg/m³
1.2 Display of the calculated throughput from
density and velocity [kg/h]
1.3 Display of the measured velocity in m/s
1.4 Display of the total flowrate since last reset
12
2. Options
2.1 - Density measuring range
[kg/m³]
2.2 - Throughput measuring range
[kg/h]
2.3 - Average velocity
2.4 - Average density
2.5 - Pipe diameter [mm]
2.6 - Correction factor
2.7 - Send parameters
2.8 - Language
à Selection and Confirming
ENTER-button
à Changing
UP- / DN-button
à Backwards
ESC-button
3. Diagnosis
3.1 - A/D-1 (Density)
3.2 - A/D-2 (Velocity)
3.3 - Current output
(mA – preset)
3.4 - Density min value
3.5 - Density max
value
3.6 - Velocity measur-
ing range [m/s]
3.7 - DAC-Calibration
3.8 - Slave Adress
DENSITY
0.0 Kg/m3
THROUGHPUT
0.0 Kg/h
VELOCITY
0.00 m/s
TOTALISATOR
0.00 Kg
Advertisement
Table of Contents
