Table of Contents
Advertisement
15
1.4 Calibration
1.4.1 Calibration filter
1.4.2 Number of calibration points
1.4.3 Calibration factor for sensor 1
1.4.4 Calibration factor for sensor 2
1.4.5 Calibration factor for sensor 3
1.4.6 Calibration point 1
1.4.7 Measured value
1.4.8 Calibration point 2
1.4.9 Calibration
1.4.10 Calibration point N
1.4.11 Measured value
For 2.1 to 2.4 / 3.1 to 3.4 / 4.1 to 4.4 – same way
5 Analogue output
5.1 Beginning of range
5.2 End of range
5.3 MIN limit
5.4 MAX limit
5.5 Alarm value
5.6 Filter time
5.7 Calibration: 4 mA
5.8 Calibration: 20 mA
Range of 0,1...999,9 s
Range of 2...5 base points
Rating of sensor signal with several
sensors used and disconnecting of 1
sensor with 0
Rating of sensor signal with several
sensors used and disconnecting of 1
sensor with 0
Rating of sensor signal with several
sensors used and disconnecting of 1
sensor with 0
Measurement range init and end
Record of input value
... (depends on the number of the
calibration points)
Measurement range init and end
Record of input value
Range of 0...22 mA (Std. 4 mA)
Range of 0...22 mA (Std. 20 mA)
Range of 0...22 mA (Standard 3 mA)
Range of 0...22 mA (Std. 20 mA)
Range of 0...22 mA (Standard 3 mA)
Range of 0,1...999,9 s (Standard 1 s)
Adjust output current
(calibration to 4 mA)
Adjust output current
(calibration to 20 mA)
Advertisement
Table of Contents
