Analogue outputs
Basic points
System
In the following there is the menu structure:
13
The analogue outputs can be defined in menu point 5.
They can be adapted to the operator's requirements
(e.g. 0-20mA).
The measurement can be checked for linearity by means
of varying moisture values. To improve the accuracy
those values have to be determined. If there are devia-
tions the non existent linearity can be corrected / levelled
by means of the use of more than 2 base points.
Settings according language, time, temperature of sensor
and LCD contrast. The communication with the evalua-
tion unit by Modbus, address and data rate is done ac-
cording to the system settings. Adjustment of the Modbus
by entering the baud rate and address. Adjustment of the
ergonomics by setting the contrast and lightning time.