Table of Contents
Advertisement
24
7.2 Modbus Address
Setting of Mod-bus address between 1 ... 250.
With C you set the value to 0.0. With the num-
bers you input the beginning value and with
the input is accepted and you quit the menu level.
7.3 Contrast
Adapt the contrast to desired value with the keys < <
und >> quickly and with the keys < und > slowly.
With the input is accepted and you quit the
menu level. With C you quit the menu point
without any change.
7.4 Language
Choose of language between D / F / ENG
With and you make a choice according to
the display. With C you quit the menu point
without any change and with the input is ac-
cepted and you quit the menu level.
7.5 Backlight
Setting of durable lightning or the luminescence
(in min).
With C you set the value to 0 (equals to durable
lightning) by means of the numbers and with
the input is accepted and the menu level is quitted.
7.6 T. -Display
Determine if the temperature is shown in the dis-
play – the values are on and off
There is no temperature output by analogue out-
put!
With and you make a choice according to
the display. With C you quit the menu point without any change and with the
input is accepted and you quit the menu level.
System
7
8
Address
4
5
1
1
2
C
0
System
Contrast
< < <
> >>
System
Language
D
System
7
8
Backlight
4
5
0
min
1
2
C
0
System
Temp. display
off
9
6
3
C
C
9
6
3
C
Advertisement
Table of Contents
