Jeep Cherokee 2018 Owner's Manual page 293

Setting Name
Rear ParkSense Braking Assist
— If Equipped
NOTE:
When the "Rear ParkSense Braking Assist" feature is selected, the park assist system will detect objects located behind the vehicle and utilize au-
tonomous braking to stop the vehicle.
Tilt Mirrors In Reverse — If
Equipped
NOTE:
When the "Tilt Mirrors In Reverse" feature is selected, the exterior sideview mirrors will tilt downward when the ignition is in the RUN position and the
gear selector is in the REVERSE position. The mirrors will move back to their previous position when the transmission is shifted out of REVERSE.
Blind Spot Alert — If Equipped
NOTE:
When the "Blind Spot Alert" feature is selected, the Blind Spot Monitor (BSM) system is activated and will show a visual alert in the outside mirrors,
or it will show a visual alert in the outside mirrors as well as play an audible alert when the turn signal is on. When "Off" is selected, the Blind Spot
Monitor (BSM) system is deactivated.
If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged, the sensor may have be-
come misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. A sensor that is misaligned will result in the BSM not operat-
ing to specification.
ParkView Backup Camera Active
Guide Lines — If Equipped
ParkView Backup Camera Fixed
Guide Lines — If Equipped
ParkView Backup Camera Delay
290
On
Off
Enable
Selectable Options
Off
Lights
Disable
Lights and Chime