Green Indicator Lights; White Indicator Lights - Jeep Cherokee 2018 Owner's Manual

Green Indicator Lights

— Adaptive Cruise Control (ACC) Set
With Target Light — If Equipped
This will display when the ACC is set and a
target vehicle is detected. Refer to "Adaptive
Cruise Control (ACC)" in "Starting And Operat-
ing" for further information.
— Adaptive Cruise Control (ACC) Set
Without Target Light — If Equipped
This will display the distance setting for the ACC
system when the system is engaged. Refer to
"Adaptive Cruise Control (ACC)" in "Starting And
Operating" for further information.
— ECO Mode Indicator Light
This light will turn on when ECO Mode is active.
— Cruise Control Set Indicator Light —
If Equipped
This light will turn on when the speed control is
set to the desired speed. Refer to "Speed Con-
trol" in "Starting And Operating" for further infor-
mation.
— Front Fog Indicator Light — If
Equipped
This indicator will illuminate when the front fog
lights are on.
— LaneSense Indicator Light — If
Equipped
The LaneSense indicator is solid green when
both lane markings have been detected and the
system is "armed" and ready to provide visual
and torque warnings if an unintentional lane
90
departure occurs. Refer to "LaneSense — If
Equipped" in "Starting And Operating" for further
information.
— Park/Headlight On Indicator Light
This indicator will illuminate when the park lights
or headlights are turned on.
— Stop/Start Active Indicator Light — If
Equipped
This telltale will illuminate when the Stop/Start
function is in "Autostop" mode.
— Turn Signal Indicator Lights
When the left or right turn signal is activated, the
turn signal indicator will flash independently and
the corresponding exterior turn signal lamps will
flash. Turn signals can be activated when the
multifunction lever is moved down (left) or up
(right).
NOTE:
• A continuous chime will sound if the vehicle is
driven more than 1 mile (1.6 km) with either
turn signal on.
• Check for an inoperative outside light bulb if
either indicator flashes at a rapid rate.

White Indicator Lights

— Adaptive Cruise Control (ACC) Ready
Light — If Equipped
This light will turn on when Adaptive Cruise
Control (ACC) has been turned on, but is not
set. Refer to "Adaptive Cruise Control " in "Start-
ing And Operating" for further information.
— Adaptive Cruise Control (ACC) Set
Light — If Equipped
This light will turn on when the vehicle equipped
with Adaptive Cruise Control (ACC) has reached
the speed desired and the set button has been
selected. Refer to "Adaptive Cruise Control" in
"Starting And Operating" for further information.
— Selec Speed Control Indicator Light
— If Equipped
This light will turn on when "Selec Speed Con-
trol" is activated.
To activate "Selec Speed Control", assure the
vehicle is Four Wheel Drive Low (4WD) and
push the button on the Instrument Panel.
NOTE:
If the vehicle is not in 4WD Low, "To Enter
Selec-Speed Shift to 4WD Low" will appear in
the instrument cluster display.
— Cruise Control Ready Indicator Light
This light will turn on when the speed control has
been turned on, but not set. Refer to "Speed
Control — If Equipped" in "Starting And Operat-
ing" for further information.
— Hill Descent Control (HDC) Indicator
Light — If Equipped
This indicator shows when the Hill Descent
Control (HDC) feature is turned on. The lamp
will be on solid when HDC is armed. HDC can
only be armed when the transfer case is in the
"4WD LOW" position and the vehicle speed is
less then 30 mph (48 km/h). If these conditions