Parallel Parking Space Assistance Operation/Display - Jeep Cherokee 2018 Owner's Manual

NOTE:
If the vehicle is driven above approximately
15 mph (25 km/h), the instrument cluster display
will instruct the driver to slow down. If the vehicle
is driven above approximately 18 mph (30 km/
h), the system will cancel. The driver must then
reactivate the system by pushing the ParkSense
Active Park Assist switch.
• The outer surface and the underside of the
front and rear fascias/bumpers are clean and
clear of snow, ice, mud, dirt or other
obstruction.
When pushed, the LED on the ParkSense Ac-
tive Park Assist switch will blink momentarily,
and then the LED will turn off if any of the above
conditions are not present.
Parallel Parking Space Assistance
Operation/Display
When the ParkSense Active Park Assist system
is enabled the "Active ParkSense Searching -
Push OK to Switch to Perpendicular" message
will appear in the instrument cluster display. You
may switch to perpendicular parking if you de-
sire. Push the OK button on the left side steering
wheel switch to change your parking space
setting.
NOTE:
• When searching for a parking space, use the
turn signal indicator to select which side of
the vehicle you want to perform the parking
maneuver. The ParkSense Active Park Assist
system will automatically search for a parking
space on the passenger's side of the vehicle
if the turn signal is not activated.
• The driver needs to make sure that the se-
lected parking space for the maneuver re-
mains free and clear of any obstructions (e.g.
pedestrians, bicycles, etc.).
• The driver is responsible to ensure that the
selected parking space is suitable for the
maneuver and free/clear of anything that may
be overhanging or protruding into the parking
space (e.g., ladders, tailgates, etc. from sur-
rounding objects/vehicles).
• When seeking for a parking space, the driver
should drive as parallel or perpendicular (de-
pending on the type of maneuver) to other
vehicles as possible.
• The feature will only indicate the last detected
parking space (example: if passing multiple
available parking spaces, the system will only
indicate the last detected parking space for
the maneuver).
Active ParkSense Searching
When an available parking space has been
found, and the vehicle is not in position, you will
be instructed to move forward to position the
vehicle for a parallel parking sequence.
Space Found — Keep Moving Forward
Once the vehicle is in position, you will be
instructed to stop the vehicle's movement and
remove your hands from the steering wheel.
187