Maintenance; Maintenance Schedule; Disinfecting/Cleaning Restraints; Disinfecting/Cleaning The Chair - Ferno EZ-Glide 59T User Manual

7.1 Maintenance Schedule

The chair requires regular maintenance. Set up and follow a
maintenance schedule. The table at right represents minimum intervals
for maintenance.
Keep maintenance records. A sample maintenance record sheet is
provided on page 38.
When using maintenance products, follow the manufacturers' directions
and read the manufacturers' material safety data sheets. You can purchase
a recommended disinfectant from your Ferno distributor or Ferno
Customer Relations (page 2).

7.2 Disinfecting/Cleaning Restraints

Ankle Restraint: Place buckled restraint in a mesh bag and launder in
a washing machine using warm water, a disinfectant soap, and gentle
agitation. Hang the restraint to dry. Do not put it in a dryer.
Chest and Lap Restraints: Disinfect and clean restraints as directed in
the restraint users' manual provided. Additional, free users' manuals can
be obtained from Ferno. See "Ferno Customer Relations" on page 2.

7.3 Disinfecting/Cleaning the Chair

To disinfect: Remove restraints and seat and back panels. Wipe all
surfaces of the chair and panels with disinfectant. Follow the disinfectant
manufacturer's directions for application method and contact time.
To clean: Wash panels and all parts of the chair with warm water and
a mild detergent. Rinse with clean water. Dry with a towel or allow to
air-dry.

7.4 Cleaning Tracks and Belts

To ensure predictable belt performance, it is important to keep the track
and belts free of oil, grease, dirt, and debris.
1. Hold the belts away from the track frame and remove any debris.
2. Clean both sides of the track frame, and both belts, with SD-20
All-Purpose Cleaner and a clean cloth. Follow instructions on the
container.
3. Dry track and belts thoroughly.


Note: To order SD-20™ Cleaner in North America, contact the Spartan
Chemical Company, Maumee, Ohio, USA at 1.800.537.8990 or visit
www.spartanchemical.com on the internet.
© Ferno-Washington, Inc. / 234-3298-07 / July 2018

Maintenance

7 - MAINTENANCE
Disinfect the Chair (this page)
Clean the Chair (this page)
Clean Tracks and Belts (this page)
Chair Inspection (page 28)
Track System Inspection (page 28)
Lubricating the Chair (page 29)
Adjust Belt Tension (page 31)
Improper maintenance can cause injury. Maintain the
chair only as described in this manual.
Disinfectants and cleaners containing bleach, phenolics, or
iodines can cause damage. Use caution when disinfecting
and cleaning with products containing these chemicals.
Using abrasive cleaning compounds or applicators on the
chair can cause damage. Do not use abrasive materials to
clean the chair or PowerTraxx.
™
Minimum
Maintenance Intervals
WARNING
NOTICE
DO NOT PRESSURE WASH
Water under high pressure, or steam, can
penetrate joints, flush away lubricant, and
cause corrosion. Do not pressure wash the
chair or PowerTraxx.
•
•
•
• •
• •
•
•
27