Ankle Restraint - Ferno EZ-Glide 59T User Manual

4.3 Ankle Restraint

Use the ankle restraint to help keep the patient's feet on the footrest.
Attach the two-piece ankle restraint to the front legs of the chair. To
attach the restraint:
1. Unbuckle the restraint to separate the straps.
2. Wrap a strap around one front leg of the chair and thread the
buckle through the loop, then pull the strap tight around the
chair leg (Figure 3).
3. Attach the remaining strap to the opposite front leg.
4. Buckle the restraint and adjust the length (Figure 4).
© Ferno-Washington, Inc. / 234-3298-07 / July 2018
Setup/Installation
3
4
13