Ferno Transcend Chair Series User Manual

Ferno Transcend Chair Series User Manual

Carry chair, manual tracks, and powertraxx
Table of Contents

Advertisement

Transcend
Chair Series
Carry Chair, Manual Tracks, and PowerTraxx®
Read this Manual and Retain
for Future Reference
Users' Manual
August 2021
Pub. No. 234-3801-00

Advertisement

Table of Contents
loading

Summary of Contents for Ferno Transcend Chair Series

  • Page 1 Transcend Chair Series ™ Carry Chair, Manual Tracks, and PowerTraxx® Read this Manual and Retain for Future Reference Users’ Manual August 2021 Pub. No. 234-3801-00...
  • Page 2: Ferno Customer Relations

    The label is located on the The chairs sold by Ferno are covered by a limited warranty, which is printed on all Ferno invoices. The complete terms and conditions of the limited warranty, and the limitations of liability and disclaimers, are also available upon request by calling Ferno at 1.800.733.3766 or...
  • Page 3: Table Of Contents

    Telescoping Lift Handles____________________________ 19 Parts List ________________________________________ 38 10 - Accessories __________________________________________ 40 Armrests ________________________________________ 19 Footrest _________________________________________ 20 Training Record__________________________________________ 41 Maintenance Record _____________________________________ 42 Wheel Locks _____________________________________ 20 Notes __________________________________________________ 43 © Ferno / 234-3801-00 / August 2021...
  • Page 4: Safety Information

    Improper use of the chair can cause injury. Use the chair only for the purpose described in this manual. Improper charging can cause injury or damage. Use only the Ferno-approved battery with the chair, and charge only with the Ferno-approved battery charger. 1.4 Bloodborne Disease Notice Modifying the battery can cause injury and damage.
  • Page 5: Symbol Glossary

    Safety Information 1.5 Symbol Glossary The symbols defined here are used on the chair and/or in this’ manual. Ferno uses symbols recognized by the International Standards Organization (ISO), American National Standards Institute (ANSI) and the emergency medical services industry. Symbol...
  • Page 6: Safety And Instruction Labels

    EN 1865: Performance and crash-test standards ● RoHS-2: Meets the requirements of EU Directive 2011/65/EU ● and as ammended by EU Directive 2015/863 (“RoHS-3”) on the restriction of the use of certain hazardous substances. © Ferno / 234-3801-00 / August 2021...
  • Page 7: Operator Focus

    Roll the chair in a circle to verify it rolls easily. ● Visually inspect the chair for readiness. See “Inspecting the Chair” on page 31. ● PowerTraxx: Verify the battery is charged and all powered controls function properly. © Ferno / 234-3801-00 / August 2021...
  • Page 8: Using Additional Help

    If available, a third trained helper “spots” for the lead operator when ● Two Helpers descending stairs. ● Ferno recommends that helpers work in pairs to help maintain chair balance. Refer to the chart for suggested placement for operators and helpers. DESCEND ASCEND...
  • Page 9: About The Chair

    3 - ABOUT THE CHAIR 3.1 Description WARNING The Ferno® Transcend Chair (referred to the chair in this manual) is an Improper use of the chair can cause injury. Use the chair emergency patient-handling device designed to transport a seated only for the purpose described in this manual.
  • Page 10: General Specifications

    3.2 General Specifications Load Capacity Specifications are shown in the table below. Ferno reserves the right 550 lb Inspect the chair if the load capacity to change specifications without notice. For more information, contact 250 kg has been exceeded. See “Inspecting the Ferno Customer Relations or your Ferno distributor (page 2).
  • Page 11: Component: Carry Chair & Manual Track Chair

    REAR LIFT HANDLES (2) p.19 TELESCOPING LIFT HANDLES (2) p.19 REAR LIFT HANDLES (2) p.18 EXTENDING LIFT BAR p.19 ARMRESTS (2) p.17 TRACK SYSTEM p.19 TELESCOPING LIFT HANDLES (2) p.20 WHEEL LOCK (2) p.20 FOOTREST © Ferno / 234-3801-00 / August 2021...
  • Page 12: Components: Powertraxx

    REAR LIFT HANDLES (2) p.19 TELESCOPING LIFT HANDLES (2) p.17 TRACK SYSTEM p.20 WHEEL LOCK (2) p.15 POWERTRAXX CONTROLLER p.20 FOOTREST p.18 LIFT BAR RELEASE p.19 TELESCOPING LIFT HANDLES (2) p.16 SCENE LIGHTS p.14 MAIN BATTERY © Ferno / 234-3801-00 / August 2021...
  • Page 13: Powertraxx System

    Belts (2) control for the descent. Main Battery Scene Lights (2) Power Unit Main Battery Belts (2) Power Unit Scene Lights (2) © Ferno / 234-3801-00 / August 2021...
  • Page 14: Main Battery

    It is sealed for resistance to precipitation, dirt, body fluids, cleaning Modifying the battery can cause injury and damage. Use solutions, etc. Use only the Ferno-approved battery and battery charger. the battery only as designed by Ferno. A battery is provided with purchase of a chair or PowerTraxx retrofit kit.
  • Page 15: Attaching And Removing The Main Battery

    Cord for PowerTraxx” on page 34. CONTROLLER BATTERY: Displays status of the controller battery. If Controller Battery Status the battery status light is on, replace the battery. See “Controller Battery” on page 32. © Ferno / 234-3801-00 / August 2021...
  • Page 16: Scene Lights

    Note: The wireless status light on the controller (Figure 8) is blue when the wireless connection is established. See “Controller Status Lights” on page Use the chair as instructed in this manual. Wireless Status Light © Ferno / 234-3801-00 / August 2021...
  • Page 17: Features And Options

    If the lock is fully engaged, the track system will not close. Closing the track system: With your hand, push the track hinge bar Track Hinge Bar down (Figure 10) to fold the track system. Track Crosstube Track Hinge Bar © Ferno / 234-3801-00 / August 2021...
  • Page 18: Lift Bar

    When the lock is engaged the lift bar will not move. 5.3 IV Bag Clip The lift bar (extending or fixed) has a clip at each corner to attach an IV bag (Figure 13). © Ferno / 234-3801-00 / August 2021...
  • Page 19: Rear Lift Handles

    To unlock the armrest to the out position: Slide the red release button forward and swing the armrest out (Figure 16). The armrest can be returned to the standard down position by pushing inward. © Ferno / 234-3801-00 / August 2021...
  • Page 20: Footrest

    To unlock: Press the opposite end of the lever (Figure 19). NOTICE The wheel locks are not a substitute for operator control. The operators must remain with the chair and keep control of it at all times. Do not leave the patient unattended. © Ferno / 234-3801-00 / August 2021...
  • Page 21: Using The Chair

    39.4 st to operate the chair. Chair” on page 31. ● Ferno recommends that a third trained person serve as a “spotter” while using the chair on stairs. Lift only the weight you can safely handle. Use additional help ●...
  • Page 22: Folding And Unfolding The Chair

    Note: If the swivel wheels prevent the chair from locking in the folded position, hold the chair at a greater tilt to allow the swivel wheels to rotate away from the chair frame. © Ferno / 234-3801-00 / August 2021...
  • Page 23: Transferring The Patient

    Foot-End Operator: Assist the head-end operator as needed and attend the patient. © Ferno / 234-3801-00 / August 2021...
  • Page 24: Transporting The Patient Down Stairs

    Follow your local protocols for using chairs. Ferno recommends you visualize a “landing zone” at the top or bottom NOTICE of the stairway. The landing zone should provide enough clear, safe...
  • Page 25 Close the track system. 12. To continue the descent, adjust the lift handles and lift bar as needed to maneuver the chair to the next stairway. © Ferno / 234-3801-00 / August 2021...
  • Page 26 Both Operators: Roll the chair. ○ 12. To continue the descent, reposition the chair to continue the descent. Use the chair wheels to turn and position the chair for the next stairway. © Ferno / 234-3801-00 / August 2021...
  • Page 27: Transporting The Patient Up Stairs

    Follow your local protocols for using chairs. Ferno recommends you visualize a “landing zone” at the top or bottom NOTICE of the stairway. The landing zone should provide enough clear, safe...
  • Page 28 10. To continue the ascent, adjust the lift handles and lift bar as needed to maneuver the chair to the next stairway. © Ferno / 234-3801-00 / August 2021...
  • Page 29: Pausing On The Stairs

    If the PowerTraxx system fails for any reason during an ascent, the operators must pick up the chair with its patient and carry them up the stairs. See “Using the Carry Chair and Manual Track Chair to Ascend Stairs” on page 27. © Ferno / 234-3801-00 / August 2021...
  • Page 30: Maintenance

    Inspection (page 32) Chest and Lap Restraints: Disinfect and clean restraints as directed in the restraint users’ manual provided. Additional, free users’ manuals can be obtained from Ferno Customer Relations (page 2). NOTICE 7.3 Disinfecting/Cleaning the Chair Disinfectants and cleaners containing bleach, phenolics, or To disinfect: Remove restraints and wipe all surfaces of the chair iodines can cause damage.
  • Page 31: Inspecting The Chair

    Does the track system operate smoothly, without ● binding or excessive noise? ● Are the inner cords of the belts visible (indicating the need for replacement)? ● Are the belt-tensioning bolts and nuts tight? © Ferno / 234-3801-00 / August 2021...
  • Page 32: Controller Battery

    If all three LED lights on the motor are red and blinking, the PowerTraxx system has failed. Contact EMSAR (in the U.S.A. or Canada) or your Ferno distributor for parts and service. See “Parts and Service” on page 38.
  • Page 33: Removing And Attaching The Backrest And Seat Panels

    To attach the seat panel: Orient and press the panel to the chair frame with all mounting holes aligned. Use a 3 mm hex wrench to install the four screws attaching the panel to the chair (Figure 30). © Ferno / 234-3801-00 / August 2021...
  • Page 34: Interconnect Cord For Powertraxx

    (Figure 31) when the cord is connected and will then turn green after the controller USB-A Port and motor are paired. Wireless Light Disconnect the interconnect cord and insert the cover into the USB-A port. © Ferno / 234-3801-00 / August 2021...
  • Page 35: Storing The Main Battery

    U.S.A. AND CANADA Ferno is a partner with Call2Recycle Inc., a nonprofit corporation dedicated to helping consumers locate places to responsibly dispose of rechargeable batteries to meet all U.S. and Canadian requirements. The ENDURACharge battery is licensed with Call2Recycle.
  • Page 36: Initial Setup

    Charge the battery immediately upon receipt until it has a full charge. To comply with shipping regulations, the battery must be shipped with less than a 30% charge. Charge the main battery using only a Ferno-approved battery charger (supplied). Refer to the battery users’ manual (publication 234-3689) for complete information.
  • Page 37: Attaching Patient Restraints

    Attach the mating strap of the same restraint through the seat panel slot on the opposite side of the chair. Repeat with the second restraint, attaching its straps to opposite sides of the chair. Attach the lap restraint through the seat-panel slots. © Ferno / 234-3801-00 / August 2021...
  • Page 38: Parts And Service

    Fax (Worldwide) 1.937.383.1051 Internet www.EMSAR.com 9.2 Worldwide To order Ferno parts, and for professional repair, contact your Ferno distributor. Your distributor is the only agent authorized by Ferno to manage, service, and repair Ferno chairs. 9.3 Parts List Part Description...
  • Page 39 Parts and Service © Ferno / 234-3801-00 / August 2021...
  • Page 40: Accessories

    Accessories 10 - ACCESSORIES Ferno offers a full line of accessories approved for use with the chair. WARNING Follow all instructions in accessory users’ manuals. Keep the instructions with this manual. Attaching improper items to the chair can cause injury.
  • Page 41: Training Record

    Training Record TRAINING RECORD Training Method Trainer Date Printed Name Signature Read Video/ Initials Hands-On Manual Online © Ferno / 234-3801-00 / August 2021...
  • Page 42: Maintenance Record

    Maintenance Record MAINTENANCE RECORD Date Maintenance Performed © Ferno / 234-3801-00 / August 2021...
  • Page 43: Notes

    NOTES © Ferno / 234-3801-00 / August 2021...
  • Page 44 Aviation 70 Weil Way Wilmington, OH 45177 Military Mortuary Rescue © Ferno | 234-3801-00 | August 2021...

Table of Contents