Maintenance - Ferno EZ-Glide LBS User Manual

Table of Contents

Advertisement

Maintenance

6.1 Maintenance Schedule
The chair requires regular maintenance. Set up and follow
a maintenance schedule. The table at right represents
minimum intervals for maintenance.
Keep maintenance records.
When
using
maintenance
manufacturers' directions and read the manufacturers'
material safety data sheets.
6.2 Disinfecting/Cleaning Restraints
Ankle Restraint: Place buckled restraint in a mesh bag
and launder in a washing machine using warm water, a
disinfectant soap, and gentle agitation. Hang the restraint
to dry. Do not put it in a dryer.
Chest and Lap Restraints: Disinfect and clean restraints
as directed in the restraint users' manual.
6.3 Disinfecting/Cleaning Chair
To disinfect: Remove restraints and seat and backrest
panels or soft vinyl cover. Wipe all surfaces of the chair and
panels or cover with disinfectant. Follow the disinfectant
manufacturer's directions for application method and
contact time.
To clean: Wash panels or cover, and all parts of the chair,
with warm water and a mild detergent. Rinse with clean
water. Dry with a towel or allow to air-dry.
6.4 Cleaning Track and Belts
To ensure predictable belt performance, it is important to
keep the track and belts free of oil, grease, dirt, and debris.
1. Hold the belts away from the track frame and remove
any debris.
2. Clean both sides of the track frame, and both belts,
with SD-20 All-Purpose Cleaner and a clean cloth.
Follow instructions on the container.
3. Dry track and belts thoroughly.
16
6 - MAINTENANCE
products,
follow
the
Minimum
Maintenance Intervals
Disinfecting Chair
Cleaning Chair
Cleaning Track System
Inspecting Chair
Inspecting Track System
Lubricating
WARNING
Improper maintenance can cause injury. Maintain
the chair only as described in this manual.
Important
Disinfectants
and
cleaners
phenolics, or iodines can cause damage. Use caution
when disinfecting and cleaning with products
containing these chemicals.
Important
Water under high pressure, or steam, can penetrate
joints, flush away lubricant, and cause corrosion. Use
caution when cleaning moving parts such as joints and
hinges.
Important
Using abrasive cleaning compounds or applicators
on the chair can cause damage. Do not use abrasive
materials to clean the chair.
© Ferno (UK) Ltd. FERNO/MAN/R4/0721/210-R5/UK
EZ-Glide® LBS
containing
bleach,

Advertisement

Table of Contents
loading

Table of Contents