Rear Lift Handles Model 59T-Lwh Only - Ferno EZ-Glide 59T User Manual

5.7 Rear Lift Handles
Model 59T-LWH Only
The Model 59T-LWH chair is constructed with two-stage locking handles
affixed to the sides of the chair frame. Use the handles only as a pair. Do
not lift the chair using only one handle.
To raise the handles for use: Raise each handle until it locks with an
audible click.
To unlock and fold the handles:
To unlock and fold the handles, both locks must be disengaged.
1. Press and hold the red release lever to disengage the safety lock
(Figure 17).
2. With the red release lever still pressed, grasp the center of the
handle and lift the entire handle upward to unlock the secondary
lock (Figure 18). Keep the handle parallel with the floor as you
raise it.
3. Fold the handle and release the red release lever (Figure 19).
LIFT ONLY: Lift handles are designed for lifting and carrying
the chair only. Use the handles to lift and carry the chair up
stairs or over obstacles.
To tilt and roll the chair, use the lift bar. Do not press down on
the locked handles in order to tilt or turn the chair.
18
NOTICE
Features
© Ferno-Washington, Inc. / 234-3298-07 / July 2018
17
18
19