Rear Lift Handles Models 59, 59T (Optional) - Ferno EZ-Glide 59T User Manual

5.8 Rear Lift Handles
Models 59, 59T (Optional)
If the Model 59T chair was purchased with the optional locking rear
lift handles, or if you installed a kit, use the handles as follows. To order
handles, see "Accessories" on page 34.
Use the handles only as a pair. Do not lift the chair using only one
●
handle.
● To raise a handle, lift the handle until it locks with an audible click.
To lower a handle, press the red release lever toward the chair to
●
disengage the lock (Figure 20), then lower the handle.
Keep the handles folded when not in use.
●
LIFT ONLY: Lift handles are designed for lifting and carrying
the chair only. Use the handles to lift and carry the chair up
stairs or over obstacles.
To tilt and roll the chair, use the lift bar. Do not press down on
the locked handles in order to tilt or turn the chair.
© Ferno-Washington, Inc. / 234-3298-07 / July 2018
NOTICE
Features
20
19