Ankle Restraint - Ferno 59T EZ Glide User Manual

Setup/Installation

4.3 ankle restraint

Use the ankle restraint to help keep the patient's feet on the
footrest. Attach the two-piece ankle restraint to the front
legs of the chair. To attach the restraint:
1. Unbuckle the restraint to separate the straps.
2. Wrap a strap around one front leg of the chair and
thread the buckle through the loop, then pull the strap
tight around the chair leg (Figure 3).
3. Attach the remaining strap to the opposite front leg.
4. Buckle the restraint and adjust the length (Figure 4).
10
Figure 3 - Attaching the Ankle Restraint
Figure 4 - Ankle Restraint Attached
© Ferno-Washington, Inc 234-3298-03 February 2013
59T EZ Glide®