Ultium EMG Quick Start Guide
Welcome from Noraxon
Congratulations on acquiring your new Ultium EMG System!
This guide will provide you with step by step instructions on how to install your new
hardware and software, adjust device settings, and record your first data set.
Let's begin by walking through how to install your new hardware.
Note: This is not meant to be a complete manual, but a guide to help you get started with your system.
For more detailed instructions on operating the Ultium EMG System and its features please refer to the
complete Ultium User Manual (P-8808), also included with your system.
1 System Unboxing
The Ultium System is packed within a reinforced padded box for storage and protection during
transport. Upon arrival, carefully remove all contents and verify the following components are present.
Figure 2 - EMG Sensor Docking Station (part #883)
Figure 1 - Ultium Receiver (part #880)
Figure 4 - Ultium EMG Smart Lead (part # 842)
Figure 3 - EMG Sensor (part #810)
2
(Rev A)