Table of Contents
Advertisement
dAdr
'0;DGGUHVV
MAdr
Martin address (
Personality settings
Personality
PTSP
Pan/tilt speed
PATI/SWAP
Pan/tilt swap
PATI/PINV
Pan inverse
PATI/TINV
Tilt inverse
SPEC/TRAC/MOdE
Tracking algorithm
SPEC/TRAC/CAL
Tracking samples
EFSP
Effects speed
SPEC/dISP
Display on/off
SPEC/dINT
Display intensity
SPEC/dLOF
DMX lamp off
SPEC/dRES
DMX reset
SPEC/ALON
Automatic lamp on
Automatic protocol
SPEC/AUTO
detection
SPEC/SCUT
Shortcuts
SPEC/ASHT
Automatic shutter
MOdE
Studio mode
Set the DMX address between channel 1 and 512.
): Set the Martin address between channel 1 and 31.
Path
Options
FAST
NORM
ON
OFF
ON
OFF
ON
OFF
MOd1
MOd2
1-10
FAST
SAFE
ON
OFF
10
100
-
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
NORM
STUd
Effect (Default settings shaded.)
Optimize movement for speed.*
Optimize movement for smoothness.*
Map DMX pan control to tilt channel and vice versa.
Normal pan and tilt control.
Reverse DMX pan control, right
Normal pan control, left
Reverse DMX tilt control, down
Normal tilt control, up
Absolute delta value algorithm (for most controllers)
Real delta value algorithm
Tracking samples. Increase if pan/tilt is not smooth.
Normal, full speed operation.
Reduced speed operation (mainly for early models).
Display stays on.
Display goes out 2 minutes after last key press.
Adjust display intensity.
Enable DMX lamp off command.
Disable DMX lamp off command.*
Enable DMX reset command.
Disable DMX reset command.*
Lamp strikes automatically within 90 seconds of power on.
Strike lamp from controller.
Enable automatic protocol detection.
Disable automatic protocol detection.
Effect wheels turn the shortest direction.*
Effect wheels always turn same direction.*
Shutter "helps" dimmer black out.
Shutter not affected by dimmer commands.
Optimize effects for speed.*
Optimize effects for silence.*
User Manual
left.
right.
up.
down
11
Hide quick links:
Advertisement
Table of Contents
