Sred Information - Infinite Peripherals INFINEA BLUEPAD User Manual

SRED INFORMATION

Integrating the PCI PTS 3.x SRED certified Infinea BluePad into your solution requires proper
maintenance. To ensure long and trouble free operation of the Infinea BluePad and to prevent it from
entering a tamper state includes:
• Maintaining proper battery charge. The shelf-life from full charge to battery discharge may
be several years, however it is important that battery levels be continually monitored because
once the battery power is depleted or the battery is removed, the security system will erase all
sensitive data, requiring a re-deployment of the unit.
• Protect the unit from any intentional physical damage such opening the unit, cutting, drilling,
dropping or any similar type of action.
• Use of approved chargers which supply sufficient charging current. Connecting an unapproved
charger may lead to electrical damage and/or cause security sensor malfunction.
To prevent downtime caused by the security feature becoming disabled:
• Always place the Infinea BluePad on charging station when not in use for extended
periods.
• Do not allow the Infinea BluePad battery to fully discharge.
• Do not attempt to remove the battery from the Infinea BluePad unit.
If the Infinea BluePad battery is fully discharged and enters Tamper Detect Mode, the unit
may only be reactivated at Infinite Peripherals or an authorized service facility.
Infinea® BluePad User Manual
UM-00014 Rev A
Page 38 of 47