Battery Level Status Display Indicators - Infinite Peripherals INFINEA BLUEPAD User Manual

Battery Level Status Display Indicators

CHARGE
BATLOW
BTCON
The Infinea BluePad uses the battery indicator to display the following hardware properties. The
table below explains these the hardware status.
This can be viewed in the Infinea BluePad Info Hardware menu.
To minimize the potential for deactivation, follow all storage and operating temperature guidelines.
See the TECHNICAL DATA for additional information.
Long term storage can cause temporarily decreased battery capacity. In order to recover maximum
performance, it may be necessary to go through several cycles of fully charging and discharging the
battery.
When storing the device for longer than 3 months, the battery should be charged every 3 months at
a minimum to prevent leakage, reduced performance and potential deactivation.
To replace the main battery of Infinea BluePad, please contact your Infinite Peripherals
representative or certified service center before attempting to open the Infinea BluePad
device.
Attempting to disassemble an SRED encrypted Infinea BluePad device renders the unit
unusable and may impact your warranty.
Infinea® BluePad User Manual
UM-00014 Rev A
BATT
Indicates the voltage of the battery
VBUS
Indicates if external power supply is plugged in
Indicates if the battery is charging
Identifies low battery
Shows active Bluetooth connection
Page 14 of 47