How Do I Adjust The Autopilot Settings - Raymarine S1000 User Manual

81245_1.fm Page 23 Tuesday, December 7, 2004 10:08 AM

How do I adjust the autopilot settings

Use the Pilot Parameters screen to fine tune your autopilot. This
section is recommended for experienced users only.
Pilot Setup
STANDBY
press and hold
PILOT PARAMETERS
MODE
PILOT
then:
to scroll through settings
MODE
to adjust value
PILOT
save setting and return
STANDBY
to Pilot Setup menu
press and hold
Autolearn will have set these to the optimum values.
Quick Tip
You should not normally need to change these.
User Guide
1 2
3
1. Press and hold STANDBY for
2 seconds to enter PILOT SETUP
mode.
2. Press mode until the display
reads PILOT PARAMETERS
3. Press the PILOT key to access
detailed setup menu.
4. Press mode to scroll thorugh
the available settings. The
current value for each will be
displayed alongside
5. Press the PILOT key to adjust
the value.
S1000 Settings:
Rudder Gain
Counter Rudder
Response
Auto Trim
Details of each setting are given on
the following pages
23