8
2.2 Using Auto mode
Engaging the autopilot (Auto mode)
1. Steady the boat on the required heading.
2. Place the pushrod over the tiller pin. If necessary, extend or retract
3. Press auto : the tiller pilot will enter Auto mode and the display
Disengaging the autopilot (Standby mode)
To return to hand steering:
1. Press standby .
2. Remove the pushrod from the tiller pin to return to hand steering:
3. The last heading is memorized and can be recalled (see page 11).
ST1000 Plus & ST2000 Plus Tiller Pilots - Owner's Handbook
the pushrod using the -1 , +1 , -10 , and +10 keys.
will show an ' A ' (for auto) alongside the locked autopilot heading.
the display will show a flashing ' C ' and the boat's current
compass heading.
D354-2
D353-2