Intended Use; Declaration Of Conformity; Emc Guidelines - Raymarine S1000 User Manual

81245_1.fm Page 39 Tuesday, December 7, 2004 10:08 AM

Intended Use

This Raymarine autopilot includes SRD products, the S100 Controller and in
the S1000 autopilot, which are intended for use on leisure vessel and small
work boats

Declaration of Conformity

Hereby Raymarine UK Ltd., declare that these SRD products (S1000 and
S100) are in compliance with the essential requirements and other relevant
provisions of the Directive 1999/5/EC
The original Declaration of Conformity certificate may be viewed on the
relevant product page at www.raymarine.com

EMC Guidelines

All Raymarine equipment and accessories are designed to the best industry
standards for use in the recreational marine environment. Their design and
manufacture conforms to the appropriate Electromagnetic Compatibility
(EMC) standards, but correct installation is required to ensure that
performance is not compromised.
Connections to other equipment
If your Raymarine equipment is to be connected to other equipment using a
cable not supplied by Raymarine, a suppression ferrite MUST always be
attached to the cable near to the Raymarine unit.
Handbook Information
To the best of our knowledge, the information in this handbook was correct
when it went to press. However, Raymarine cannot accept liability for any
inaccuracies or omissions it may contain. In addition, our policy of
continuous product improvement may change specifications without
User Guide 39